Your cart is currently empty!
Atelier Galerie d'art Solart
Rebound 25
$58.00
Atelier Galerie d'art Solart
Rebound 25
$58.00
Easy-to-use, platinum-based silicone, brush-applicable for making molds from almost any model. Can be applied with a brush or spatula to vertical surfaces without sagging and cures with no noticeable shrinkage. Soft and flexible, Rebound 25 is suitable for molding parts with deep undercuts (can also be used to make two-part molds - glove molds). Well suited for casting resins and low-melting-point metals. The finished product offers a long shelf life.
Technical Data Sheet
Mixing Ratio: 1A:1B by Weight or Volume
Viscosity: Brush-Applicable.
Working Time: 20 Minutes
Cure Time: 6 Hours
Hardness: 25A
Color: Orange
Related products
-
Sold outVisit product page →Premium quality plaster sold by the pound
Plaster/Cement Mixing Method
Mixing Ratio: 70 Water:100 Plaster by Weight
VICAT Set, Mixing Mechanical: 14-24 Minutes
Maximum Compressive Strength, Dry: 2,400 PSI
-50 lb -
Sold outMold Star 20T is an easy to use Shore 20A translucent platinum silicone that is mixed 1A:1B by volume (no weighing scale necessary). It features a relatively low viscosity and vacuum degassing is not required for most applications. Pot life is 6 minutes and cure time is 30 minutes at room temperature. Mold Star 20T cures into a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Mold Star 20T silicone can be thickened with Thi-Vex thickener for brush-on application and effects. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Mold Star 20T is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: This product will not cure against surfaces containing sulfur, even when sealed.Visit product page →
Pot Life: 6 mins. Cure Time: 30 mins. Shore Hardness: 20A Size: Pint Kit 2Lbs. -
Sold outVisit product page →Wax block sold by the pound used for modeling and the lost-wax bronze casting technique. This wax is malleable at low temperatures.
v
